Where to rent a furniture, kitchen or tile showroom in KL & Selangor?

Where to rent a furniture, kitchen or tile showroom in KL & Selangor?

Floor area, frontage, lorry loading, main road vs corner vs industrial edge, and a worked RM 30,000 budget for a 40 ft main-road showroom.

Published 14 Nov 2026 · Updated 15 Nov 2026
Written by
Tok Ginstee
Tok Ginstee
REN 37505 · CID Realtors Sdn Bhd (E (1) 1855)
Short answer

Short answer

A home showroom needs a wide frontage for large pieces, a rear lane a lorry can reach, and parking for customers who drive in. The best fit is usually two joined ground floors, or a corner unit, facing a main road in a mature commercial centre. In our data, RM 30,000 a month covers a 40 ft frontage across two joined ground floors in most Selangor hubs.

Where can you find a shop for a furniture showroom?

Where can you find a shop for a furniture showroom?

Furniture sells on space: a sofa set, dining table and bed frame already fill a standard 22 by 75 ft unit, so most brands want 3,000 sq ft or more on the ground floor. Look at hubs whose adverts regularly include larger units.

Hub Typical size (sq ft) Asking rent (RM/month) RM psf Adverts
Taipan Business Centre, USJ 1,650 to 3,200 7,500 to 25,000 4 to 7.5 79
Bandar Utama & Ara Damansara 1,650 to 4,000 7,000 to 20,900 3.5 to 5.5 50
Pudu & Imbi 1,650 to 4,500 8,500 to 25,000 4.3 to 8.3 48
Section 17, Petaling Jaya 1,600 to 4,560 6,000 to 19,000 3.8 to 4.2 12
Kota Damansara PJU 5 1,600 to 2,730 9,000 to 19,000 4.6 to 7.9 77
Damansara Uptown 1,650 to 3,090 10,500 to 17,000 4.7 to 9 53

Source: MCE analysis of recent portal adverts, Nov 2026: last 6 months, shop types only, bait and duplicate adverts removed, middle half of asking prices.

Where is a good shop for a kitchen cabinet showroom?

Where is a good shop for a kitchen cabinet showroom?

Kitchen cabinet buyers usually arrive during a renovation. A single ground floor of 1,600 to 2,200 sq ft fits three or four display kitchens and a consultation table. Look for hubs surrounded by mature landed housing, where owners renovate, or near townships handing over new homes. Ask for water and power points if you want to demonstrate sinks and hobs.

Where should an interior design showroom open?

Where should an interior design showroom open?

A design studio sells taste and trust. Clients book appointments, so a clean glass frontage, natural light and easy parking matter more than heavy footfall, and a single unit works. Affluent neighbourhood hubs suit it because clients live nearby; TTDI asks RM 11,500 to RM 23,000 a month and Damansara Utama (SS21) RM 11,000 to RM 17,000 in the same advert data.

Where does a tile showroom work best?

Where does a tile showroom work best?

Tiles are heavy and arrive by the pallet. Contractors come on weekdays with vans, homeowners at weekends. Loading and parking matter more than prestige, so township hubs with wide rear lanes and a front service road beat tight city streets.

Does a furniture showroom need lorry loading space?

Does a furniture showroom need lorry loading space?

Yes, and it is often missed at viewings. Check:

  • Rear lane wide enough for a 3 tonne lorry to stop without blocking the lane
  • A rear roller shutter or door wide enough for a three-seater sofa
  • No steps between the lane and the shop floor
  • A short, flat path from the lorry to the storeroom
  • Whether the council or management limits loading hours on the street
  • Ceiling height for tall wardrobes and display walls

A ground floor has a built-in advantage here: no lift, no staircase, and deliveries go straight in.

Main road or corner: which is better for a showroom?

Main road or corner: which is better for a showroom?

Factor Facing main road Corner lot
Drive-by visibility Strong, seen by every passing car Strong from two directions
Display glass One long frontage Front and side
Parking Depends on service road Often a side car park
Rent Top of the hub range Top of the range, sometimes higher
Availability of 40 ft frontage Needs two joined units One corner can be wide enough

Home showrooms are destination trades: people plan the trip and drive there. The main road builds brand recall; parking wins the visit. A corner facing the main road gives both. If you must choose, a double intermediate unit on the main road usually beats an inner-street corner. Browse current main-road shops and corner lots.

Commercial centre or next to an industrial area?

Commercial centre or next to an industrial area?

Commercial centre Industrial edge
Rent per sq ft Higher Usually lower
Passive visibility High Low, mostly trade traffic
Weekend family visits Strong Weak
Loading Needs checking Usually easy
Licence for retail display Normal shop use Check zoning with the council

Many home brands keep the showroom in a commercial centre and stock in a warehouse elsewhere. MCE focuses on ground-floor shops in commercial centres; for industrial units, check zoning and the licence with the council (DBKL, MBPJ, MBSJ) before you sign.

Worked example: 40 ft frontage on a main road, RM 30,000 a month

A 40 ft frontage usually means two standard 20 to 22 ft units joined, about 3,300 sq ft if each is 22 by 75 ft. Applying the hub psf ranges above to 3,300 sq ft:

Hub Estimated rent for 3,300 sq ft (RM/month)
Section 17, PJ 12,540 to 13,860
Bandar Utama & Ara Damansara 11,550 to 18,150
Taipan, USJ 13,200 to 24,750
Kota Damansara PJU 5 15,180 to 26,070
Pudu & Imbi 14,190 to 27,390
Damansara Uptown 15,510 to 29,700

Main-road and corner units sit at the top of each range, yet RM 30,000 still clears every hub here. Two cautions: joining units needs every owner's written consent and council approval for the renovation, and adjoining units rarely fall vacant at the same time, so start early. Test the rent against expected sales in our rent affordability calculator, then score two shortlisted sites with the site scorecard, which weighs visibility higher for showrooms.

For units that combine well, see our chain brand unit checklist. Tell us your floor area and budget on the brands page or by WhatsApp; free location advice is part of the service.

Written by Tok Ginstee (REN 37505), CID Realtors Sdn Bhd (E (1) 1855). Updated November 2026.

FAQ

Frequently asked questions

How big should a furniture showroom be?

Most furniture brands want 3,000 sq ft or more on the ground floor, which usually means two joined standard units or a large corner. Kitchen cabinet and interior design studios can work in a single 1,600 to 2,200 sq ft unit.

Can a showroom display goods on the five-foot way?

Do not assume so. The five-foot way is a public walkway in most shoplot rows, and displaying or loading goods there can draw council action. Check with DBKL, MBPJ or MBSJ before planning any outside display.

How much rent does a 40 ft frontage main-road showroom cost?

In our advert data, two joined ground floors of about 3,300 sq ft range from roughly RM 11,550 to RM 29,700 a month across Selangor hubs such as Section 17, Bandar Utama, Taipan and Damansara Uptown. Main-road units sit at the top of each range.

How long a tenancy should a showroom sign?

Showroom fit-outs are costly, so ask for a term with renewal options. A 2 + 2 structure is common in Malaysia because fixed terms over 3 years may need registration as a lease (LH Low). Agree any rent step at renewal up front. Not legal advice.

The best shops in prime hubs never go online

Every shop and price on this site is a market range, so you know what an area costs. Prime ground-floor units in busy hubs are usually let or sold quietly, before any banner or portal advert, and we offer them first to people who have already told us what they need. If you want to rent, buy or sell in a prime area, WhatsApp us your area, size, budget and trade, and we will send matching units as soon as they come up.

Free location advice: Not sure where your brand fits? Tell us your trade, target customers and budget, and we will recommend the hubs and streets that suit you best, free of charge.

Free location advice

Why work with MCE:for tenantsfor buyers and investorsfor landlords

More insights